PiKVM Rackmount with ezcoo 4-Port HDMI Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
19" Rackmount Kit for the PiKVM with the ezcoo 4-Port HDMI Switch
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 1214
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the rackmount from “cjdawson_com” interessting and build it myself. I had a few problems with the keystones not holding correctly. So I merged the Keystone Panel Mount from “M” with the original model and also added a few extra holding tabs so the m5 rod is no longer needed.
Printed in SUNLU PLA+ and Geeetech PETG
You need:
Keystones
→ HDMI 4x
→ RJ45 1x
→ USB3.0 5x
Cables (these are the ones I used)
→ HDMI 5x (https://amzn.eu/d/eFhLGuy)
→ RJ45 1x (0.5m)
→ Micro USB to USB-A 1x (https://amzn.eu/d/arv5BNL)
→ USB-C to USB-C 1x https://amzn.eu/d/dxt2inZ
→ USB-C to USB-A 1x (https://amzn.eu/d/8c7fDkz)
→ USB-A to USB-A 3.0 5x (https://amzn.eu/d/6PeVMVq)
→ 4 Pin Dupont for the i2c Screen
→ Y-Splitter for the HDMI Switch and the USB-C Power Splitter
1x (USB C power splitter)[https://www.tindie.com/products/8086net/usb-cpwr-splitter/]
1x ezcoo HDMI Switch (https://amzn.eu/d/8YwmyhV)
→ A little note on this one: I found the M2.5 Mouting Screews a bit too weak so I drilled and tapped the switch for M3 and used M3 SHCS screws
1x PiKVM
→ I build it myself with a RPi4
1x I2C oLED Screen (e.g. https://a.co/d/7g27GEB)
5v Powersupply with enough Amps ( I use a Meanwell GST25A05-P1J 5v 4A)
Screws:
M4-Screws: https://amzn.eu/d/9BLjbU0
M3x8 (or by M3x10)-Screws for the HDMI Switch
some m2 and m2.5 self tapping screws for the RPi, HDMI Board and Power Splitter.
“cjdawson_com” used a different HDMI-Capture Card so I designed an adapterplate for the “csi2 adapter black” (https://www.aliexpress.com/item/4000102166176.html?spm=a2g0o.order_list.order_list_main.10.69141802cYgUNB)