1/2" sliding t-bar holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wall/peg-board mount for a 1/2-inch sliding t-bar
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
1/2" sliding t-bar holder
It holds one sliding t-bar, it has an open front and an 8° angle, which makes it easy to reach the extension bars.
The shaft is 14.5mm (5 ⁵/₁₆") wide and sliding t-bars usually has a diameter of 13.5mm (5 ⁴⁵/₆₄"), so there is enough play for different filaments, temperatures, setups..
Print it with 10% gyroid infill, and support organic on build plate only.
You can hang it on a peg board or wall with this adapater biltema or the vanilla adapter.
The vanilla adapter can be modified so it fits wherever You need to hang these modules.
MODULA - a module based tool holder system
A universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, CC 12mm (15/32 inch) spacing of the 4mm (5/32 inch) diameter screw holes.
The idea is a adapter plate (metric/imperial/plain) that attaches to a module, the module snaps on to this adapter with dovetails.
Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their needs.
