1 / 1
Funnel for hard-to-reach filling spouts e.g. cars — zdjęcie 1

Funnel for hard-to-reach filling spouts e.g. cars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funnel for hard-to-reach filler spouts

Ocena
0 / 5
Polubienia
35
Pobrania
111
Wydruki
0
Wyświetlenia
521
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

EN:
As I needed a smaller version of the model fom VVulture, the funnel broke off at the tapered part of the tube. It's not the designer's fault, the reduction in size made the tube too thin at the transition. Also needed the handle on the other side and a different dimension of the tube, so I made a remix. This has a larger tube diameter, but is shorter and merges seamlessly into the funnel. Can be used, for example, for the hard-to-reach filler neck of the windshield washer system of the Fiat Panda and a range of other car models...

Material:   PLA, PETG
Layers:   0.3mm
Supports:   none


DE:
Da ich eine verkleinerte version des Modells von VVulture benötigte, brach mir der Trichter am sich verjüngenden Teil des Schlauches ab. Ist nicht der Fehler des Designers, durch die Verkleinerung wurde das Rohr am Übergang zu dünn. Benötigte ausserdem den Handgriff auf der anderen Seite sowie eine andere Dimension des Rohres, sodaß ich einen Remix erstellte. Dieser hat einen größeren Schlauchdurchmesser, ist aber kürzer und geht übergangslos in den Trichter über. Verwendbar z.B. für den schwer erreichbaren Einfüllstutzen der Scheibenwaschanlage des Fiat Panda und einer Reihe anderer Automodelle...

Material:   PLA, PETG
Schichten:  0.3mm
Stützen:  keine
 

Tagi