1 / 5
Makita 5903R Dust Collection Port - with quick connect DWV900 — zdjęcie 1
1 / 5

Makita 5903R Dust Collection Port - with quick connect DWV900

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Makita 5903R Dust Collection Port - with quick connect DWV900. PLA & PETG profile.

Ocena
0 / 5
Polubienia
14
Pobrania
45
Wydruki
0
Wyświetlenia
361
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Makita 5903R Dust Collection Port
This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw using a shop vacuum, in combination with the DeWalt DWV900 dust extraction quick connect. It's the perfect solution if the original dust port is missing or damaged, and you're using a DeWalt DWV900 quick connector. The design has been carefully crafted to ensure a snug, secure fit on the saw, providing optimal dust extraction during operation.

Key Features:

  • Compatibility: Designed to fit the DeWalt DWV900 dust extraction quick connect.
  • Perfect Replacement: Ideal for replacing a missing or damaged dust collection port.
  • Secure Fit: Custom-designed to tightly fit the Makita 5903R circular saw for maximum dust collection efficiency.

Specifications:

  • Fits DeWalt DWV900 dust extraction quick connect.
  • Inner Diameter: 35mm
  • Optimized for use with shop vacuums for improved dust management.

Don’t Need the Quick Connector?
Download the Makita 5903R Dust Collection Port - Without Quick Connector here: Download Link

Print Profiles:

PLA/PETG (Standard):

  • No support required
  • 2 walls, 0.2mm layer height, 20% infill
  • Rotate 180° to print without support
  • Tested with Bambu’s PLA Matte & PETG HF on the A1

PLA/PETG (Solid):

  • No support required
  • 6 walls, 0.2mm layer height
  • Rotate 180° to print without support
  • Tested with Bambu’s PLA Matte on the A1

PETG (Standard):

  • Supports for added security
  • 2 walls, 0.2mm layer height, 20% infill
  • Tested with Bambu’s PETG HF on the A1

Tagi