1 / 3
Strong shelf pin IKEA
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Strong shelf pin for Ikea and other brands, with filament insert.
I needed replacement pins for the shelves. I was worried about their strength when printing. That's why I designed them with an inner hole, into which superglue is dripped after printing and filament is inserted, which significantly increases the strength. Then you just have to trim the end and use it. Since the pins are small, I connected them with a grid for greater stability, which you simply break off or cut off after printing.
Use 100% infill
I also added a classic full version