1 / 2
Water Bottle Screw Lid / Cap (Easy Print no Supports) — zdjęcie 1
1 / 2

Water Bottle Screw Lid / Cap (Easy Print no Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement water bottle screw cap / lid for standard metal drinking bottles and flasks.

Ocena
5 / 5
Polubienia
49
Pobrania
306
Wydruki
3
Wyświetlenia
1852
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A replacement water bottle screw cap / lid for standard metal drinking bottles and flasks.

I designed this to print in two parts so it is easy to print with no supports and get a good finish. Print both parts and the screw part will screw in to the handle part. Run a fillet of glue around the inside of the handle thread so that once the screw part is screwed in it will not come out again.
I was able to still use the old washer / o-ring for the seal.

I also used 4 outer layers and 30% infill to make sure it was solid. Prints well in PLA or PETG.

Print instructions

I also used 4 outer layers and 30% infill to make sure it was solid. Prints well in PLA or PETG.

Tagi