Water Bottle Screw Lid / Cap (Easy Print no Supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement water bottle screw cap / lid for standard metal drinking bottles and flasks.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 306
- Makes
- 3
- Views
- 1,857
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement water bottle screw cap / lid for standard metal drinking bottles and flasks.
I designed this to print in two parts so it is easy to print with no supports and get a good finish. Print both parts and the screw part will screw in to the handle part. Run a fillet of glue around the inside of the handle thread so that once the screw part is screwed in it will not come out again.
I was able to still use the old washer / o-ring for the seal.
I also used 4 outer layers and 30% infill to make sure it was solid. Prints well in PLA or PETG.
Print instructions
I also used 4 outer layers and 30% infill to make sure it was solid. Prints well in PLA or PETG.