Bottom dust cover for microscopes (Meopta, PZO, Carl Zeiss and others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cover for older microscopes (may fit newer ones as well)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have plenty of microscope parts mostly from 1970 era and they did not have any dust covers so I designed this cover to protect optics from the dust.
Another model to protect top part is here: https://www.printables.com/model/1119068-upper-dust-cover-for-microscopes-meopta-pzo-carl-z
I realized after a while, that it didn't fit to bottoms that have pin for correct orientation, so I made another version with hole for the pin.
My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: Smooth PEI
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: PLA (PETG should be good as well)
- supports: no need
- perimeters: 3
- solid layers (top/bottom): 5/4
Feel free to support me on Ko-Fi https://ko-fi.com/kutilman
I can also sell my source files if you want to save some time designing variation.
Contact me here or via email on https://juraj.mriso.com