1 / 4
Air intake duct with light lock and nut. (68mm hole) — zdjęcie 1
1 / 4

Air intake duct with light lock and nut. (68mm hole)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've designed a nice little air intake with a double zig zag to keep te light in/out the enclosure.

Ocena
5 / 5
Polubienia
2
Pobrania
46
Wydruki
0
Wyświetlenia
238
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Someone needed an air intake that blocks the light from passing through so I designed one. The hole you need to make is 68mm in diameter. I'm far to stupid to make this parametric, so this size wille have to do. You can always install 2 if you are unsure if the amount of airflow is sufficiënt. Just make sure to print it face down so it can print without support.

Just give me a shout if this was useful, always nice to hear. 

Tagi