NF-A15 fan joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts for joining together and mounting Noctua NF-A15 fans
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a pair of models I put together to join a set of Noctua NF-A15 fans for a hot air exhaust solution. Existing models like these [0] from JustinB [1] are not suitable for the NF-A15 due to the inset 120mm mounting holes on the NF-A15.
The side by side bracket from [0] provided inspiration for my joiner part, which was modeled from scratch in FreeCAD (file attached). The joiner .fcstd file includes a base sketch which resembles the dimensions of the NF-A15 noted in this image [2] from what looks like a Noctua slide deck, which I found on this review post [3] from 2013.
My prints were done with eSun PLA with no special settings. You shouldn't need supports or anything like that, the parts are flat.
[0] https://www.printables.com/model/483807-120mm-fan-joining-brackets
[1] https://www.printables.com/@JustinB
[2] https://www.pctechreviews.com.au/wp-content/gallery/hardware_cooling_noctua-a14-15_gallery2/16.jpg
[3] https://www.pctechreviews.com.au/2013/06/01/noctua-nf-a14-15-reviewed/4/
