1 / 5
keebcover - A 65% Keyboard Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
keebcover is a keyboard cover aimed for 65% keyboards, optimized for smaller printers using a fully symmetrical design.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Open Community License v1.1 + General Attribution v1
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
Originally created for a GIBKEY G68, keebcover is a keyboard cover designed with smaller printers in mind. I have an Ender 3 V3 SE, so I made sure that this model can be printed in one go, while making good contact between the sliced parts.
- The model is perfectly symmetrical so all you need to do is print 2 of the same or pick and choose between the 2 text/notext options!
- You can use it as-is if all you care about is protecting the keyboard from dust, but you can also glue the 2 pieces together if you prefer that.
- An internal joint part was also added in version 2, which helps with gluing/fitting the 2 main parts together.
- An internal joint part was also added in version 2, which helps with gluing/fitting the 2 main parts together.
- The outside dimensions are 310mm x 102mm, which match my keyboard exactly. The perimeter wall is 3mm thick. Some filing/trimming may be required on the end model.
Feel free to edit this model to fit differently sized keyboards!
Donations are appreciated! You can leave one by clicking here!