Office chair wheel adapter for Ikea SNIGLAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adapter to connect office chair wheels to an Ikea SNIGLAR changing table.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
We have had an Ikea SNIGLAR changing table in our basement for a while, which is rarely used. I wanted to repurpose it as a shelf that could also be mobile. Fortunately, I still had some old office chair wheels that I wanted to attach to the changing table.
That’s the idea behind this model. The wheels can simply be inserted into the prints, which are then attached to the legs of the changing table. This makes it easy to move the table back and forth.
The wheels have a standard pegsize with a diameter of 11mm and a length of about 23mm. The opening for the leg is 21x39mm. The model is designed to fit quite snug so that the wheels don't fall off if you lift the table.
Print recommendations:
- PLA
- 30% cubic infill
- .3 layer height
- 7 perimiters
- 4 top , 3 bottom layers
Happy printing 😊