Tripod Clamp for Alpha 3500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clamps for the Alpha 3500 tripod
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
I designed replacement clamps for both the upper and lower clamps, though I have only tested the larger upper clamp myself. There is a small white piece of plastic between the clamp and the tripod leg. This piece is also required when using the new 3D-printed clamp.
I recommend ASA as the material, but I printed mine using eSUN's easyPA.
Print Settings:
- Support: Enabled
- Wall Loops: 4
- Infill: 70%
Assembly Instructions:
To remove the broken clamp, gently tap the pin out with a nail and hammer. When assembling with the 3D-printed clamp, position the tripod so the hole aligns with the edge of a workbench or similar surface to provide stability. Don't forget the small white plastic piece!