Tripod Clamp for Alpha 3500
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clamps for the Alpha 3500 tripod
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I designed replacement clamps for both the upper and lower clamps, though I have only tested the larger upper clamp myself. There is a small white piece of plastic between the clamp and the tripod leg. This piece is also required when using the new 3D-printed clamp.
I recommend ASA as the material, but I printed mine using eSUN's easyPA.
Print Settings:
- Support: Enabled
- Wall Loops: 4
- Infill: 70%
Assembly Instructions:
To remove the broken clamp, gently tap the pin out with a nail and hammer. When assembling with the 3D-printed clamp, position the tripod so the hole aligns with the edge of a workbench or similar surface to provide stability. Don't forget the small white plastic piece!