1 / 7
Vixien dovetail for fast release plate from aliexpress
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vixien plate for a double fast release plate from aliexpress.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Vixien plate for a double fast release plate from aliexpress
You will need some metric screws, nuts and washers:
2x M3 screws, 12 or 10 mm long
1x M8 screw, 16mm long
1x M8 Thin nut
1x M8 Washer
The screws can be attached like in the images above, or the M8 thin nut goes on the bottom
If printed in PLA, then use at least 3 walls, Petg and other ones too, 2 walls would be pushing the limit.