DMTDuoSharp 207x67mm base (with magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bulky base to keep sharpening stone steady and in place.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I have never bothered to buy the official base as found it to be flimsy and hollow.
After long time of improvising I have decided to design my own bulky base to hold sharpening stone steady.
There are three parts in my design.
- Bottom pad made of TPU to keep the base stable on the countertop.
- Base to hold the stone with optional magnets.
- TPU insert to keep the stone just above the edge of the base for improved stability.
Bottom pad is optional if you plan to screw the base to the piece of wood (diameter of the holes is 4mm).
TPU insert gives soft surface to lay in the sharpening stone. It can be made of PLA but I have not tested the feel. This part is mandatory as it keeps the stone surface above the edge of the base.
Magnets in the base are optional . But they give nice secure feeling when inserting the stone.
Base with installed sharpening stone feels very stable and gives complete control during the sharpening process.
Hardware: neodymium magnets size 20x6x2mm. My magnets came from China and were a tad smaller so I have used super glue to hold them in.