3in/45mm Magnetic exhaust duct screen pass through connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use magnets to connect an air duct through a screen
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
For people who have a laser cutter or printer with exhaust and have to vent it through a window, but have a screen and need to close that window.
Required things:
6 60x10x3mm magnets if you want to pass through a screen
9 60x10x3mm magnets if you want to use it with a window and a screen
2 hose clamps and ducting
Super glue
To attach the magnets, either simply super glue it in, or (and this is my preferred way), grab a thin sheet of plastic or cardstock and cut out the center hole. Then use super glue on the plastic and not the magnet. It makes it look much cleaner and the force of the magnet is distributed over the entire face instead of just the magnet.