1 / 3
Desk Clamp for lights and microphones - easy print — zdjęcie 1
1 / 3

Desk Clamp for lights and microphones - easy print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A multi purpose desk clamp that I remixed from Tiarin Hinos model. This version prints perfectly without supports!

Ocena
0 / 5
Polubienia
10
Pobrania
59
Wydruki
0
Wyświetlenia
310
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple and universal desk clamp that accepts rods with up to 10mm diameter. 

I used it together with a flexible microphone holder that I recycled to get an awseome table microphone stand.

The model printed easily without support on my Prusa Mini. I would recommend increasing the wall thickness and the infill to 30% to give it more strenght. 

I also used variable layer hight to get a 0.1mm layer hight around the threads in the holder and a standard 0.15mm layer hight for the rest of the model to safe some time. 

Tagi