Travel Case for Wireless Totem Split Keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic travel case for the Totem wireless keyboard with space for the USB reciever.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 2012
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
*DISCLAIMER: This case is not completely flush with the keyboard. There is about 1mm of total play in between the case and the keyboard. because of this, I recommend sticking cut-to-size rubber feet on the sides of the keyboard or case wall to increase friction. See last picture for illustration*
This travel case was explicitly designed for GEIGEIGEIST's Totem Keyboard case and hardware. This case considers the rubber stands on the bottom of the totem case and any magnetic USB-C charger insert. (SEE IMAGES)
My Totem uses the dongle setup for increased battery life.
See:
https://github.com/eigatech/zmk-config/tree/totem-dongle
https://www.printables.com/model/522586-seeed-xiao-ble-case
I printed it at 0.2 layer height with no supports and 20% infill. I bought these magnets, but any 6x3mm circular magnet should work.
Inspired by @Rhynier_476301's Corne travel case