Travel Case for Wireless Totem Split Keyboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic travel case for the Totem wireless keyboard with space for the USB reciever.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 163
- Makes
- 1
- Views
- 2,012
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
*DISCLAIMER: This case is not completely flush with the keyboard. There is about 1mm of total play in between the case and the keyboard. because of this, I recommend sticking cut-to-size rubber feet on the sides of the keyboard or case wall to increase friction. See last picture for illustration*
This travel case was explicitly designed for GEIGEIGEIST's Totem Keyboard case and hardware. This case considers the rubber stands on the bottom of the totem case and any magnetic USB-C charger insert. (SEE IMAGES)
My Totem uses the dongle setup for increased battery life.
See:
https://github.com/eigatech/zmk-config/tree/totem-dongle
https://www.printables.com/model/522586-seeed-xiao-ble-case
I printed it at 0.2 layer height with no supports and 20% infill. I bought these magnets, but any 6x3mm circular magnet should work.
Inspired by @Rhynier_476301's Corne travel case