1 / 5
Nikon S2 Halterung für Augenkorrekturlinse, holder for eye piece correction — zdjęcie 1
1 / 5

Nikon S2 Halterung für Augenkorrekturlinse, holder for eye piece correction

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nikon S2 Halterung für Augenkorrekturlinse, holder for eye piece correction

Ocena
5 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
165
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Mit dieser Halterung für die Nikon S2 Messsucherkamera kann eine Nikon Augenkorrekturlinse vor dem Okular angebracht werden damit das Sucherbild wieder scharf erscheint.
Passen für die Nikon Korrekturlinsen für die F oder F2 oder FM oder FE oder jede andere Korrekturlinse mit M19 x 0,75 Gewinde.
Gedruckt auf Prusa MK4 mit Prusa PLA bzw auch mit Jayo PLA+, Naht zufällig, Schichthöhe 0,1mm
Achtung: Korrekturlinse vorsichtig und mit Gefühl einschrauben damit das Gewinde nicht verschnitten wird. Notfalls eine neue Halterung drucken ;-)
…………………..
With this mount for the Nikon S2 rangefinder camera, a Nikon eye correction lens can be attached in front of the eyepiece so that the viewfinder image appears sharp again.
Suitable for the Nikon correction lenses for the F or F2 or FM or FE or any other correction lens with M19 x 0.75 thread.
Printed on Prusa MK4 with Prusa PLA or also with Jayo PLA+, random seam, layer height 0.1mm
Caution: Screw in the correction lens carefully and with feeling so that the thread is not cut. If necessary, print a new mount ;-)

Tagi