QIDI Q1 Pro Exhaust fan removeable back cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because of the strong winds, the cool air from outside gets pushed to the inside of the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 610
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Because of the strong winds during winter here, the cold air gets pushed to the inside of the QIDI Q1 Pro enclosure if I have the exhaust system (by Igor R.) attached. Since his duct adapter is removeable, I added this back cover port that fits in the system's mounting plate with a handle for easy removal. I printed this in Elegoo ASA but I'm sure PETG can work as well.
Also added an STEP file if you want to customize further.
Settings used for ASA for Orcaslicer:
.4 nozzle
.2 Standard
15% Cross hatch infill (pretty sure any will work)
With brim @ 3mm
Nozzle temp - 250
Bed temp - 90
No cooling
Rest is Orca's generic ASA settings.