1 / 2
PICO MMU WristWatch G2 filament hub mount — zdjęcie 1
1 / 2

PICO MMU WristWatch G2 filament hub mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PICO MMU WristWatch G2 filament hub mount

Ocena
0 / 5
Polubienia
13
Pobrania
52
Wydruki
0
Wyświetlenia
726
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have only dry tested this with a mock extruder/motor. Feedback is appreciated if you run into issues. 

 

Here's a WristWatch G2 filament hub mount I modeled as I plan to be making a PICO MMU soon. 

 

I modeled to fit the two sensor version of the extruder here : https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_G2_Dual_Filament_Sensor   .  This version is slightly bigger, however this should also fit the standard version. https://github.com/tetsu97/WristWatch-G2-Extruder 

 

I printed with supports on the bed only so that the holes and cutout was supported as the tolerance is quite tight. 

Tagi