DH98 Mosquito Lithophane Lampshade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lampshade Lithophane of a DH98 Mosquito in flight. Fits standard E27 lamps with screw style shade holder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lithophane lampshade of a DH98 Mosquito in flight. Specifically KA114 flying over New Zealand. I modified the photo from Bob Leask and replaced the sky with one that tiled and was better suited to be used as a lithophane and so there was no seam on the lamp.
I used this lamp but any that are E26/E27 with a screw style lampshade holder should work just fine. I printed mine out of Sunlu white PETG which pairs well with a 2700k lamp to get a nice sepia tone in person.
Print Settings: 0.4mm Nozzle, 0.1mm layer height, 8 walls(purposefully over the thickness of the model to ensure it is solid), 0 top and bottom layers, support painted under the ring that interfaces to the lamp.