1 / 7
Sierpiński Snowflake Fractal Tower - Level 4 (Vase Mode) — zdjęcie 1
1 / 7

Sierpiński Snowflake Fractal Tower - Level 4 (Vase Mode)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Endless Design Lab's Level Four Sierpiński Snowflake Fractal, with advanced complexity and a seamlessly attached base. ❄

Ocena
5 / 5
Polubienia
15
Pobrania
92
Wydruki
1
Wyświetlenia
442
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Endless Design Lab’s Level Four Sierpiński Snowflake Fractal Tower pushes this series into a much higher level of detail, with four layers of fractal recursion and the same seamless base design. It’s a great print for anyone who enjoys complex geometry, while still being approachable to slice and print in vase mode. Even with the added complexity, the total print time is still reasonable at just under eleven and a half hours.

The base is built directly into the model for stability and a clean, integrated look. It’s optimized for smooth vase mode printing, keeping the surface consistent while preserving the intricate structure. From certain angles, the 90 degree geometry can create an illusion that resembles squares or cubes depending on the view. Level Four adds a significant jump in fractal depth compared to earlier levels, and the cross sections remain especially interesting since each height reveals its own dense pattern.

3D Print Settings 

This model is optimized for FDM vase mode. Use Spiral Vase Mode (Spiralize Outer Contour) and do not enable “Smooth Spiral” if your slicer has that option.

Set Slice Gap Closing Radius to 0. This is critical, or the slicer may close required gaps.

Tip: Enable a Skirt to prime nozzle pressure and avoid a deformed corner on the first layer.

For the bottom line pattern shown in the photos, set Bottom Layers to 0.

If you run into any issues, leave a comment and I’ll help when I can.

License Information:

This model is licensed under Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA). You may share, copy, and redistribute the file for non-commercial purposes with proper attribution. Modifications must remain under the same license. Selling this model or modified versions, either digitally or as physical prints, is strictly prohibited.

*Selling physical prints of my designs is only permitted if you are an active member of my Authorized Seller tier on Patreon, Printables, or MakerWorld.* To learn more, visit https://www.patreon.com/c/endlessdesignlab

Thank you for downloading and supporting Endless Design Lab! 🌀

Endless Design Lab has many more mind-melting models to be unveiled!

Please show your support by following me on your favorite platforms. 
https://linktr.ee/EndlessDesignLab

🤝 Want to collaborate?
📧 Email me at [email protected]

EXTRA SPECIAL THANKS to Nat 

https://www.printables.com/@Nat_ 

Your work, especially on the Spiral Vase Mode Octahedroflake, did more than just influence my designs. When I first saw it, I was so incredibly drawn to its intricate patterns, and that moment sparked my obsession with fractal geometry. Exploring this realm has reshaped the way I think about Art and Math and pushed me to keep learning, experimenting, and sharing. I’m truly grateful for your inspiration and the passion it ignited in me.

🌀

You can find Nat's Octahedroflake here:

Tagi