Filament dry storage adapter for Kichly Storage v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your hygroscopic filaments. Holds a good amount of dessicant and either a rectangular or circular hygrometer.
- Ocena
- 4,5 / 5
- Polubienia
- 28
- Pobrania
- 206
- Wydruki
- 4
- Wyświetlenia
- 1079
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: Please take care to ensure that you match the download to your version of the box. We have seen at least two versions; one sold in 2024 until early 2025, and one sold from 2025, that is still as far as I know, current.
Hygrometer holder snaps onto the front of the dessicate box, holding in the lid.
Wanted a snug fit to the bottom of these (Amazon UK) Kichly cereal storage containers.
Please ensure that you download the correct version of your box; many thanks to @beachview_542634 for helping work out the differences. The differences can be observed on the lids:
And on the bases (I cut mine up to measure):
Printing:
DOUBLE CHECK THE PRINT FILES MATCH YOUR MODEL OF CONTAINER
PLA is fine.
Print Infill first on at least the first 0.9mm of the bases to handle the tricky overhang. No brim, and arachne walls.
Print Hygrometer holders back down onto the bed.
The v2 no longer need supports to print. If you are printing the v1 the tabs at the front of the base WILL need support.