Kitfox Series 7 Super Sport STI Flaperon Tip Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These fit the flaperons on the Kitfox Series 7 airfoil shape. DOES NOT fit the earlier symmetrical shape flaperons.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed these parts to be 3d printed and used to cover the ends of the flaperons. You'll need to print 2 mirrored parts.
Print settings: I recommend a layer height of .16mm or finer, and that you use a 5 wall thickness so that the flange that you match drill is solid. It's also recommended that you use ABS, ASA or similar print material, as standard PLA does not handle UV or hot days very well.
It's recommended that you use hysol to bond these parts in place (be sure to test compatibility with the material you decide to print them in, or you may use 3/32 pop rivets to mount these. (Kitfox part number 95001-000, drill #40). Start by drilling the ends of the flaperon first using the built in spacing guide. Match drill the 3D print, and pop rivet in place. You should have no need to remove these, but they can be removed easily enough by drilling out the rivets. You can print, sand and paint these as needed. Be sure to confirm compatibility between print material and painting materials.
See the Youtube video for this here:
⚠ DISCLAIMER: For use on Experimental Aircraft only. Please consult FAA regulations for further guidance.
The information provided by this file page or the Let's Build This - Youtube channel is for inspirational purposes. Experimental aviation involves inherent risks, including injury, loss of property, or even loss of life. You assume full responsibility for any actions taken based on the information or files downloaded here. This information makes no warranties or guarantees, expressed or implied, regarding the outcomes of any projects or procedures. I am not liable for any loss, damage (including actual, consequential, or punitive), or injury resulting from the use or misuse of the information or files provided.
