1 / 3
height gauge /measuring bridge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caliper bridge that can be used to accurately measure depth without the need for a special depth caliper.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
You can use an M4 screw to clamp the caliper, which will fit into the threaded hole. For best results, it's recommended to re-tap the thread with a thread cutter, although it works just as well without! 😊 Make sure to tighten the screw gently, as the part is 3D printed from PLA and requires a bit of care when clamping. 🔧 I hope you enjoy using it, and happy measuring! This tool has made several of my measuring tasks much easier and more accurate.
Tagi
toolbridgeassemblysupportcalibrationmechanicalengineeringadjustmentworkshopequipmentmaintenancecontrolprecisiongaugeaccuracymachinequalityextensioncaliperlevelingmeasuringmeasurementcomponentsurfacepositioningflatnessheightproductionsetupmachiningmetalworkingdepthfineinspectiondimensionalworkpieceassurance