Sherpa Mini w/EBB36 Raised Drag Chain for Voron Trindent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a raised Horizontal drag chan mount that I made for my XOL Toolhead with Sherpa Mini and EBB36 on my 350 VT
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 569
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After trying a couple of other horizontal dragchain models for my Voron Trident 350 (XOL with Sherpa mini and EBB36), i found that the chain would drag on the X Gantry, sometimes causing a layer shift. I used modified the EBB36 Sherpa mini mount with strain relief and created this new one. I am getting great XY acceleration with minimal vibrations.
BOM
10x11 Cable Drag Chain (I used this one https://www.amazon.com/gp/product/B07QLGWQ1L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)
1xM3x30 SHCS
1xM3 Hex nut
3xM3 Het Set Inserts (for the rear mount)
3xM3x8 SHCS
Print using standard Voron Profile from ABS or ASA
.2 Layer Height
4 Walls
5 Bottom Layers
5 top Layers
40% Grid Infill