1 / 6
Sherpa Mini w/EBB36 Raised Drag Chain for Voron Trindent — image 1
1 / 6

Sherpa Mini w/EBB36 Raised Drag Chain for Voron Trindent

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a raised Horizontal drag chan mount that I made for my XOL Toolhead with Sherpa Mini and EBB36 on my 350 VT

Rating
5 / 5
Likes
12
Downloads
70
Makes
1
Views
569
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

After trying a couple of other horizontal dragchain models for my Voron Trident 350 (XOL with Sherpa mini and EBB36), i found that the chain would drag on the X Gantry, sometimes causing a layer shift.  I used modified the EBB36 Sherpa mini mount with strain relief and created this new one.  I am getting great XY acceleration with minimal vibrations.

BOM

10x11 Cable Drag Chain (I used this one https://www.amazon.com/gp/product/B07QLGWQ1L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)

1xM3x30 SHCS

1xM3 Hex nut

3xM3 Het Set Inserts (for the rear mount)

3xM3x8 SHCS

 

Print using standard Voron Profile from ABS or ASA 

.2 Layer Height

4 Walls

5 Bottom Layers

5 top Layers

40% Grid Infill

Tags