Filament Spool Adapter for Smooth Rotation (Ender 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spool adapter is light and strong. Only 2 walls, no support/infill.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Description
This filament spool adapter is designed to fit inside SUNLU** filament spools (Ø 73 mm).
It slides easily onto the stock filament holder (Ø 30mm) of the Creality Ender 3, ensuring smoother rotation during printing.
**Updates:
- New adapter for Amazon Basics Spools.
Printing Recommendations
Nozzle: 0.6 mm
Layer height: 0.2 mm (or more).
Only 2 perimeters (walls).
No infill, and no supports required.
Z Seam Position: Back Side (or paint it on PS2.9.0, see pic).
Wall Generator: Arachne.
Prints well with PLA, PETG, ABS. You can also test other materials.
Calibration Test
In addition to being a practical accessory, this design can serve as a print test to evaluate:
- Dimensional accuracy (e.g., outer diameter and fit on spool/rod).
- Wall adhesion and smoothness.
- Printer's extrusion consistency with thin walls.
- Printer's maximum speed, jerk and acceleration.
- Test for new filaments or new colors.