1 / 10
Filament Dryer Spacer For Letting Humidity Out
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model for letting the humidity out of filament dryers. Prints with no supports.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Lots of filament dryers recommend keeping a small gap to let out humidity, but also lots of them don't have any way to make a gap. This is a simple solution for that problem. I designed it in FreeCAD, so if anyone wants to customize it I will provide the file.
It will fit any filament dryer that has a lid thickness of less than 6mm. I have a Comgrow filament dryer and it works great with it.
Prints fast, and with no supports
Printing Settings:
| Resolution : | 0.2 | Support: | NO |
| Infill : | 15% | Raft: | NO |
| Material: | PLA | Filament Designation : | ANY |
More designs
Tagi
dryboxfilamentfilamentspoolspacerdryerdryfilamentstoragefilamentholderfilamentsamplefilamentdryfilamentdryerfilamentdryerdrydryfilamentdryingfilamentdryboxdryboxbracketdryerboxdryboxspoolholdersellfilamentdryingdryboxdrydryboxpartsdryboxcontainercomercialfilamentdryerholderdryboxfixfilamentdryeraccessoriesdryboxspoolrollerfilamentdryingboxfilamentdrycontainerfilamentdryingcontainerfilamentspacerdryingspacerfilamentdryerspacerdryedryerspacer


