Mounting Solution for 7 Inch Screen on Sovol SV08
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Braket to mount a Touch-Screen for a Sovol SV08. This is an additional part for an existing model linked below.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The model can be printed directly on its mounting surface, and supports are recommended for the steepest overhangs. It is mounted using two M3x12mm screws on the printer's side panel, and at least two M3x10mm screws are required to attach the screencase to this bracket.
This model is specifically designed for the 7-inch touchscreen from Elecrow.
The low Profile model places the screen above the printer and at a steeper angle.
The case and adapter can be downloaded here: https://www.printables.com/model/10886-elecrow-7-inch-lcd-screen-case-no-gluing-required