Mounting Solution for 7 Inch Screen on Sovol SV08
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Braket to mount a Touch-Screen for a Sovol SV08. This is an additional part for an existing model linked below.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 116
- Makes
- 0
- Views
- 940
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The model can be printed directly on its mounting surface, and supports are recommended for the steepest overhangs. It is mounted using two M3x12mm screws on the printer's side panel, and at least two M3x10mm screws are required to attach the screencase to this bracket.
This model is specifically designed for the 7-inch touchscreen from Elecrow.
The low Profile model places the screen above the printer and at a steeper angle.
The case and adapter can be downloaded here: https://www.printables.com/model/10886-elecrow-7-inch-lcd-screen-case-no-gluing-required