1 / 2
Ikea Lack enlosure Light and fan switch box - castomizable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small and nice box for your light and fan switches - castom 3D model for your needs :)
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 1560
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (2)Kolekcje (108)Powiązane
Enjoy design!
It's small switchbox to turn on and off the fans and lights.
- The box is inserted in rectangular hole in Ikea Lack table top (hole dimensions 94 x 42 mm, I use drill and handsaw);
- Secure box with hot glue in hole;
- Nice design for standart round rocker switch (Diameter = 20.5 mm);


- The front panel has symbols indicating what the switches operate;
- Powered by 12V, 1,5A DC power supplay;

- I use 12V LED strip and two 12V fans;

- Needed some sodering cables, all negatives wires conected to all together and to power supply. Positive calbes conected to switches and then to fans/lights;

