1 / 8
Zypo Fidget (Zippo shaped, magnets, bearing)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zippo shaped fidget with magnets and bearing. Can be printed without needing screws, nuts, and bearing.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane
Zippo shaped fidget designed for smooth, satisfying operation. Has a bearing for seamless movement, magnets to securely hold the top open and closed, and additional magnets on the base for stable placement. Delivers a deeply satisfying thunk sound and tactile feel with every flick.
Hardware:
- M2 8mm screws (9)
- M2 nuts (9)
- 8x3mm magnets (9)
- MR105-2RS Ball Bearings 5x10x4mm (1)
- (Optional) Felt - there is a 0.8mm gap between the bottom and top for a piece of felt or other muffling material. This makes a deeper thunk sound and quiets it down.
Without Screws, nuts, and bearing:
- 8x3mm magnets (9)
- Print the “*-No-Screws.stl” files.
- Print the Zypo-Fake-Bearing.stl file.
- Glue the two sides together.
Print Settings:
- Filament: (recommend) PETG.
- See the 3mf file for full details.
- Layer Height: Optimized for 0.15 but 0.2 should work fine.
- Perimeters: 3
- In-Fill: 50% - 100% to get a clean thunk sound.
- Supports: Only on build plate, only on the bottom pieces.
- Support Blockers: Magnet and nut holes.
- NOTE: There are 2 pause prints for the bottom piece with the nuts.
Notes:
- Zypo in the video and pictures was printed with PETG-CF.
- The “template” files are for cutting out felt pads.