1 / 8
Zypo Fidget (Zippo shaped, magnets, bearing) — image 1
1 / 8

Zypo Fidget (Zippo shaped, magnets, bearing)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zippo shaped fidget with magnets and bearing. Can be printed without needing screws, nuts, and bearing.

Rating
0 / 5
Likes
5
Downloads
19
Makes
0
Views
342
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Zippo shaped fidget designed for smooth, satisfying operation. Has a bearing for seamless movement, magnets to securely hold the top open and closed, and additional magnets on the base for stable placement. Delivers a deeply satisfying thunk sound and tactile feel with every flick. 

 

 

Hardware:

  • M2 8mm screws (9)
  • M2 nuts (9)
  • 8x3mm magnets (9)
  • MR105-2RS Ball Bearings 5x10x4mm (1)
  • (Optional) Felt - there is a 0.8mm gap between the bottom and top for a piece of felt or other muffling material. This makes a deeper thunk sound and quiets it down.

Without Screws, nuts, and bearing:

  • 8x3mm magnets (9)
  • Print the “*-No-Screws.stl” files.
  • Print the Zypo-Fake-Bearing.stl file.
  • Glue the two sides together.

Print Settings:

  • Filament: (recommend) PETG.
  • See the 3mf file for full details.
  • Layer Height: Optimized for 0.15 but 0.2 should work fine.
  • Perimeters: 3
  • In-Fill: 50% - 100% to get a clean thunk sound.
  • Supports: Only on build plate, only on the bottom pieces.
  • Support Blockers: Magnet and nut holes.
  • NOTE: There are 2 pause prints for the bottom piece with the nuts.

Notes:

  • Zypo in the video and pictures was printed with PETG-CF.
  • The “template” files are for cutting out felt pads.

 

Tags