Skadis Levitating Toolbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NO SUPPORTS! Tight fit hooks to mount tools on a Skadis board.
- Ocena
- 5 / 5
- Polubienia
- 143
- Pobrania
- 523
- Wydruki
- 6
- Wyświetlenia
- 5156
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tight fit on a 40mm Skadis board, snap it in gently. No support needed for every files in this print.
Printed in PETG, 0.20mm speed profile, 0.4mm nozzle, 40% triangle infill, 3 or 4 walls for durability and a brim for the narrow objects. No supports.
Designed to be print and play right out of the printer if you have a good bed adhesion.
Modular bins for skadis designed to be space wise if you want to print many of them and not waste space on your board between bins. Also modular and easy to remove from the board if needed.
Screwdrivers, pliers, knife, measuring tape, drill, hammer, ratchet, socket… A lot of stuff can fit on those supports, be creative!
Would like to see your makes and how you play with the colors for a good looking organized workspace!