Furniture Legs for IKEA Alex Drawers or other furniture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Furniture legs for IKEA Alex drawers that raise it to Level of Alex Desk. Could be used for other Furniture as well
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I made these furniture legs to go on my IKEA Alex drawers (ALEX drawer unit, black-brown, 141/8x271/2" - IKEA) so that they are the same height as my Alex desk (ALEX desk, black-brown, 52x227/8" - IKEA). They line up with the IKEA Alex screw pattern. However, there's no reason that these couldn't be used on other furniture if you squared them up with the edges.
I made mine at 2.5 inches then realized it was about 0.25 inches short, so I made a 2.75-inch version, but posted the 2.5-inch version anyway in case anyone wants that.
I used four 0.75-inch #6 self-tapping Philips head screws for each foot. I also attached felt furniture sliders to the feet (I did this for the desk too, so it shouldn't affect the height). I used these in place of the tiny feet that it came with or the optional casters.
I made this model using Solidworks.
Here's a link to IKEA: