Print in place adjustable phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A phone stand with an adjustable angle which is designed to print in place with no supports. There is also space for…
- Ocena
- 4,714 / 5
- Polubienia
- 80
- Pobrania
- 696
- Wydruki
- 7
- Wyświetlenia
- 2362
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
A phone stand with an adjustable angle which is designed to print in place with no supports. There is also space for phones with cases and pop sockets.
My phone is on the large side so you may want to scale the print to better fit yours. I did try to allow enough clearance for scaling to work fine but I haven't tried it myself.
I have added an updated version which should help the stand hold a wider variety of phones more easily in portrait mode. I haven't tested the new model yet and scaling might still be needed depending on the specific phone used.
Edit: after testing, it seems the arms can slightly get in the way of the screen. For this reason, I'm also adding a version with shorter arms.
Print Settings
Supports:
No
Infill:
20% cubic
Category: Mobile Phone