1 / 3
IKEA Kallax Cable Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cable clip is designed to be friction fit to the back of the popular IKEA Kallax shelves.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (46)Powiązane
Its recommended to print it it PETG for the needed flexibility.
Print orientation is shown in the picture for optimized layer orientation and thus rigidity.
This part has bridges and can generally be printed without supports.
2 support structures need to be cut off / broken off like shown in the picture and marked by small recessed lines.