1 / 1
Multiconnect Drop + THX AAA ONE Amp Under Desk Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiconnect compatible mount for the Drop + THX AAA ONE Amp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the Item Holder from BlackjackDuck's Multiconnect Part Generator. Modeled to fit the Drop + THX AAA™ ONE Linear Amplifier, but cut out some holes for the rubber feet to make the mount thinner overall, and to act as a retention mechanism if you reinstall them through the holes.
I printed mine in PLA.
To install:
- Unscrew the feet from the bottom of the amp (the feet and the screw don't seem to be attached - if you pull a little bit and keep unscrewing, they should eventually come off)
- Insert the amp from the front
- Reattach the feet through the holes on the bottom of the mount.
- Attach to any standard Multiconnect mount.
Settings for the generated item holder:
- internalHeight: 207mm
- internalWidth: 207.5mm
- internalDepth: 32mm
Some extra dimensions that I measured:
- 30mm rubber feet diameter
- ~206.1mm width, rear plate with the I/O and power socket seems slightly wider
- 207mm depth
- 30mm height
- Screw holes for feet are centered 20mm in from the sides, ~23mm from back
- Mid to mid distance for screw holes: 166mm across, 157.5mm front to back