1 / 1
Multiconnect Drop + THX AAA ONE Amp Under Desk Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiconnect compatible mount for the Drop + THX AAA ONE Amp
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the Item Holder from BlackjackDuck's Multiconnect Part Generator. Modeled to fit the Drop + THX AAA™ ONE Linear Amplifier, but cut out some holes for the rubber feet to make the mount thinner overall, and to act as a retention mechanism if you reinstall them through the holes.
I printed mine in PLA.
To install:
- Unscrew the feet from the bottom of the amp (the feet and the screw don't seem to be attached - if you pull a little bit and keep unscrewing, they should eventually come off)
- Insert the amp from the front
- Reattach the feet through the holes on the bottom of the mount.
- Attach to any standard Multiconnect mount.
Settings for the generated item holder:
- internalHeight: 207mm
- internalWidth: 207.5mm
- internalDepth: 32mm
Some extra dimensions that I measured:
- 30mm rubber feet diameter
- ~206.1mm width, rear plate with the I/O and power socket seems slightly wider
- 207mm depth
- 30mm height
- Screw holes for feet are centered 20mm in from the sides, ~23mm from back
- Mid to mid distance for screw holes: 166mm across, 157.5mm front to back