Logitech MK350 Keyboard Leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple replacement for a Logitech MK350 Keyboard leg. Print a second and have a complete set!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
First published ad-hoc model.
I recently had a co-worker break his MK350 Keyboard legs, so I threw this together quickly with a caliper right quick on the spot. It closes, but not flat like the originals. This is version 1. If anyone would like a version 2 let me know. I used Tinkercad to throw it together (Forgive me).
There are 2 small supports on the outside, but they should be easy to remove with the right settings
Printed with: Anycubic Kobra 2 Pro
Support Material: Organic
Top Contact Z distance: .1 (detachable)
Bottom contact Z distance: Same as top
Infill Density: 25%
Layer height: .1
Fill Patern: Gyroid
Print Quality: .20mm
Print time: 10-13minutes
Print Speed: standard
Sliced & Exported with: PrusaSlicer 2.90
If any other print settings are needed, let me know. I will update them if requested.