1 / 4
Center Finder for Kingroon KP3S Pro V2 Bed Screws — zdjęcie 1
1 / 4

Center Finder for Kingroon KP3S Pro V2 Bed Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To help mark the screw holes to remove the KP3S-V2s print bed.

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Use the wedge to find the post for the bed screws, pinch against the bed, then mark a line on the magnetic sheet. Mark from multiple angles to find the intersect.

Use a 2mm drill to free up the screw holes. The screws use 2.5mm allen keys. My ones were inset far enough that they could just spin freely without the glue holding it back.

The PEI sheet will just stay flat over the holes, no worries for quality loss.

Tagi