Baby Car Illuminated Mirror Remote Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for the remote that comes with baby rearview mirrors that have built in lights so you'll never lose it again.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I bought a baby rearview mirror for my car so I could keep an eye on my daughter while we were on the road. I found a mirror that had an included light that was operated by remote, but I kept loosing it and having to search for it in the dark. I came up with this bracket to hold it up by my rearview mirror and easily feel the buttons in the dark without taking my eyes too far away from the road.
The mirror I have is this one, but it seems like this is a white label product that a ton of Amazon sellers sell so all the remotes are the exact same.
All I did to secure this was put some double sided tape on the back and press it into place. The remote is super light and it doesn't take much force to press the buttons, so no need to go overboard here. I used 3M's VHB tape here because I already had some, but that's definitely overkill.
Ideally print this in ASA if you got it as it has good UV and temperature resistance, but ABS is almost identical in performance except for the UV resistance. PETG will do the trick just fine unless you're in a super hot climate, but it may melt on you.