Rainwater diverter for 100x50 downpipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rainwater diverted for 50x100 downpipes. Uses an adaptor on the side designed to match common tank outlets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A rainwater diverter for 100x50 downpipes.
It's designed to avoid cutting down on the cross-sectional area of the downpipe so even when the tank is full the downpipe still has full capacity.
Has an adaptor on the side that can be easily swapped out for different pipe connections.
Includes a leaf grate to minimise leaves getting into the tank.
Include a shortened version that should be printable on a Mk3.
Current design is for this type of outlet. https://www.bunnings.com.au/philmac-1-tank-outlet_p4814052
Uses M4 brass inserts and M4x50mm bolts.
Update: 19/01/24 - Added a version that uses 10x15mm m4 nuts (designed to go into 2020 extrusion) to bolt the adaptor on. The brass inserts I used pulled out too easily. Also added a downpipe connector as the normal PVC one I got from the hardware store leaks.