Oral B Power Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the Oral B Power Hub, four chargers are connected so that only one socket is occupied.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With the Oral B Power Hub, four chargers are connected so that only one socket is occupied.
Attention: Basic electrical knowledge is required for the electrical connection of the 230 V connection cables.
For the Oral B Power Hub you need:
1x “Unterteil” (PETG)
1x “Deckel + Schrift” (two-color print) (PETG)
5x “Dichtung” (TPU 94A or similar)
I recommend printing a seal first and checking the fit with the connecting cable. The seal must slide over the cable with some force. If necessary, fine adjustments must be made in the slicer.
You will also need the following for assembly:
10x screw M3x30 countersunk head
10x M3 nut
The M3 nuts are inserted into the ten small slots in the cover.
As the tolerances are quite tight, your printer should be well calibrated.
Have fun with the model
Dome
Translated with DeepL.com (free version)