The BEST Passthrough Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a really cool and neat passthrough cube model that has two unique inner pieces that are fun to print and use!
- Ocena
- 3,333 / 5
- Polubienia
- 26
- Pobrania
- 275
- Wydruki
- 2
- Wyświetlenia
- 830
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
I made this cube to give you a choice inside. One inner piece has a flat edge that sits smoothly against the outer part, and the other is the standard inner piece, where you can see the rings from outside.
Colors matter here. I pair shades from opposite sides of the color scheme, and that contrast is what makes the inner piece stand out against the outer shell.
It also works with my Triangle Passthrough, as long as you print both at the same size. The files are All Pieces, Outer Piece, Flat Inner Piece, and Circular Inner Piece.
Print Settings:
Infill: 0%-10% (at 0% there is no overhang)
Filament: PLA
Supports: NO
Brim: NO
XY Compensation: -0.35 (inner piece)
In PrusaSlicer, go to Print Settings, then Advanced Settings, and set XY Size Compensation to -0.35 for the inner piece. If the inner piece does not fit, reprint it and follow that step. I like hearing about makes, questions, and requests.
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.
You may also like:
The BEST Rectangle Passthrough
The BEST Spiral Impossible Vortex