1 / 4
Tummi Gummi Magnet (multi-color)(8x3mm magnets)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adventures of the Gummi Bears - Tummi Gummi
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Pictured Examples printed on a BambuLab X1C (Textured PEI)
Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s
Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Additional coloring was then added manually with the paint bucket and other tools.
8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)
Hope you enjoy!